Specifications | Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) | | Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) | | Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω, Input Gain = Maximum | | Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 | | Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 | | Crosstalk | -70 dB @ 1 kHz | | Phantom Power | + 48 V | | Input HPF | CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct | | CH EQ (MONO) ±15 dB (Max.) | High | 10 k Hz: shelving | | Mid | 2.5 k Hz: peaking | | Low | 100 Hz: shelving | | CH EQ (STEREO) ±15 dB (Max.) | High | 10 k Hz: shelving | | Mid | 2.5 k Hz: peaking | | Low | 100 Hz: shelving | | Compressor (COMP) | control x 1 (Gain/Threshold/Ratio), CH 1-8 | | Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) | | LED Level Meter / Pre Monitor Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. | | Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). | | USB Audio / USB IN/OUT | Sampling Frequency = 44.1kHz or 48kHz (depend on the application of PC) | | Power Supply Adapter | PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m | | Power Consumption | 35 W | | Dimensions (W x H x D) | 478 mm x 105 mm x 496 mm | | Net Weight | 5.5 kg | | Options | Foot Switch (FC-5) |
|
