| Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
| Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
| Hum and Noise | -128 dBu Equivalent Input Noise/-100 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 O, Input Gain = Maximum |
| Input Connectors | MIC: 4, LINE: 2 mono + 4 stereo, CH INSERT: 2, RETURN: 1 stereo, 2TR IN: 1 stereo |
| Output Connectors | ST: 1, AUX SEND: 1, CH INSERT: 2, REC: 1 stereo, MONITOR: 1 stereo, Phone: 1 |
| Input HPF | CH 1-2 and CH 3/4-5/6, 80Hz, 12dB/oct |
| CH EQ (MONO) ±15 dB (Max.) | High | 10 k Hz: shelving |
| Mid | 2.5 k Hz: peaking |
| Low | 100 k Hz: shelving |
| CH EQ (STEREO) ±15 dB (Max.) | High | 10 k Hz: shelving |
| Mid | — |
| Low | 100 Hz: shelving |
| Compressor (COMP) | Control x 1 (Gain / Threshold / Ratio), CH 1-2 |
| LED Level Meter / Pre Monitor Level | 2 x 7 points LED meter (PEAK, +6, +3, 0,-5, -10, -20 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
| Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
| Power Supply Adapter | PA-10: AC 38VCT, 0.62A,Cable Length = 3.6m |
| Power Consumption | 21 W |
| Dimensions (W x H x D) | 256.6 mm x 62.2 mm x 302.5 mm 346.2 mm |
| Net Weight | 1.5 kg |
| Options | Microphone Stand Adaptor (BMS-10A) |
